Thermo Scientific™ 10mm Assembled Clear Autosampler Vial Kits Catalog number: C4010-67W Related applications: Chromatography Technical Support Customer Service Save time during sample preparation and reduce the risk of contamination.
Thermo Scientific™ 10mm Assembled Clear Autosampler Vial Kits Catalog number: C4010-67W Related applications: Chromatography Technical Support Customer Service Save time during sample preparation and reduce the risk of contamination.
Description. Choose from this selection of chemically inert polypropylene vials that are suitable for most chromatography applications. These 10mm plastic screw thread vials provide an economical alternative to glass for some applications. They are manufactured from high-quality, GC-tested polypropylene material and feature a 10-425 finish.
Choose from these Thermo Scientific™ 10mm Clear Glass Wide Opening Screw Thread Vials that are manufactured from clear, (Type 1 Class A) glass and have a 10-425 thread finish. Get maximum sample extraction without need for separate inserts by using Microsampling and High Recovery Vials.
Save time and reduce the risk of contamination using this convenience kit. It includes 100 clear vials pre-assembled with 100 screw thread caps and septa. Shop Thermo Scientific™ 10mm
Add 100 μ l of the provided HPLC mobile phase solution to the vial (10 mM ammonium formate in water : 10 mM ammonium formate in methanol, 1: 2 v / v) 8. Transfer the reconstituted sample to a 100 μ l autosampler glass insert and place into the same autosampler vial. The sample is ready for analysis. Whilst the LC-MS is running, all equipment
Certified 40 mL screw top vials with 24 mm cap closures. 0.2 and 2 mL screw top vial-cap kits; includes SureStop vials with AVCS caps. Includes innovative vial-cap technology to ensures proper screw cap seal every time. Highest levels of sample security and integrity. Use with mass spectrometry.
Manufactured from superior quality 51A amber (Type 1, Class B) glass, Thermo Scientific™ 10mm Wide Opening Screw Thread Vials are have a 10-425 thread finish. Choose the right vial for your needs. Get maximum sample extraction without need for separate inserts by using Microsampling and High Recovery Vials. Identify sample and volume using
6. Add 2 mL of desorbing solvent to each vial using a 5-mL syringe or 2-mL pipette. Cap each vial. 7. Allow to stand 30 minutes, immerse vials approximately 15 mm in an ultrasonic bath for 30 minutes. Alternatively, place the vials in a shaker or tumbler for 1 hour. 8. Transfer 1 to 1.5 mL from each 4-mL vial to a clean 2-mL GC vial, cap and label.
This 90-position autosampler sample rack features square holes, with side length of 13.5 mm, designed for 8 mL round-bottom and 7 mL flat-bottom vials. Rugged racks are molded of autoclavable polypropylene. Footprint dimensions fit many different auto samplers. Each rack features end plates for.
This 24-position autosampler sample rack features square holes, with side length of 25.2 mm, designed for 30 mL vials. Rugged racks are molded of autoclavable polypropylene. Footprint dimensions fit many different auto samplers. Each rack features end plates for labeling as well as numbered and Related Products: Vial Rack Compare this item
Jan 31, 2022 · It is advised that the vial is filled to the shoulder to allow a headspace at the top. Try to remove too much from the vial If more than one injection is taken from the same vial (for example, injections of standards) then it is easy to forget that there is a finite amount of solution in the vial.
PerkinElmer. and is chemical resistant to acidic, neutral and alkali solutions. All our vials are packed in a clean environment to ensure you receive contaminant free product every time. Volume: 2 mL Size: 12 x 32 mm I.D.: 10 mm Finish: Screw Top Description:Amber glass with Write-on patch and fill lines.
Thermo Scientific™ 10mm Assembled Amber Autosampler Vial Kits Save time and reduce the risk of contamination using this convenience kit. It includes 100 amber vials pre-assembled with 100 screw thread caps and septa. $158.00 - $183.00 Specifications View More Specs Products 5 Description Specifications Description
Plastic Vial 9-425 Screw Thread Polypropylene 700 µL <5 µL Kits (certified) 19 AR0-9993-13-C AR0-9994-13-C Plastic Vial 9-425 Screw Thread Polypropylene 300 µL <2 µL Kits (certified and regular) 20 19 AR0-9991-13 AR0-9992-13 AR0-9995-13-C Micro Vial with Tapered Base v-Vial 11 mm Snap or 9-425 Screw Thread or 10 mm Screw Thread Glass 1.4 mL
Sample rack, 9 pos, 22.5 mm OD vials 6851.1020 x x x Sample rack, 16 pos, 15 mm OD vials 6851.1030 x x x Sample rack, 54 pos, 12 mm OD vials .1023 x x x Sample rack, 96 pos, 6 mm OD vials .1026 x x x Sample rack, 96 pos, 7 mm OD vials .1030 x x x Sample rack, 96 pos, 8 mm OD vials .1034 x x x Normal-Phase (NP) kit VC System 6036