labForce® (a Thomas Scientific Brand) labForce Brand autosampler vials, 12x32mm with 9mm screw thread are designed to work in robotic arm autosamplers. Manufactured from Type I borosilicate glass Designed to work in robotic arm autosamplers Available with graduated marking spot Made in the USA. Related Products: 9mm Vial.
Jan 27, 2021 · Amber Vial Material : ND9mm Screw Thread Autosampler Amber Lab Vials are made of Type 1, Class A Borosilicate Glass with a writable label for sample identification, meeting the international standards for hydrolytic extraction, ASTM E-438 Type 1 class A borosilicate glass, compliant with the requirements of U.S. and European Pharmacopeia which
Autosamplers can handle vials, tubes, microtiter plates, and PCR plates. Sample capacities vary, but can reach up to an eight-rack unit that holds 720 samples, and instruments for low- to high-volume applications (0.1 to 5000 µL).
9mm standard 2ml short threaded sample vial(2ml autosampler vial), 2ml, 12×32mm, neck diameter 9mm; red PTFE/white silicone vial gasket, blue perforated polypropylene (PP) vial cap, sample vial has Transparent, amber, transparent with scale writing, and amber with scale writing are available for selection, suitable for various models of autosamplers such as Aijiren, Waters, Varian and Shimadzu.
Autosampler Vials and Vial Sets Thermo Scientific™ 9mm Assembled Clear Autosampler Vial Kits Save time and reduce the risk of contamination using this convenience kit.
Limited-Volume 2.0 mL, 9 mm Screw-Thread Polypropylene Vials Restek Fit all 2.0 mL, 12 x 32 mm, vial-based autosamplers. Compatible with all 9 mm screw-thread caps. PTFE-free—ideal for PFAS analysis (e.g., EPA 537) and other PFAS-sensitive methods. Related Products: Polypropylene Vial Compare this item
Consistent vial-to-vial and lot-to-lot performance High recovery vials for limited sample volumes Compatible with all autosamplers and designed to fit a range of caps Complete selection of vial sizes and materials with combination packs for easy ordering Reduced analyte peak variability for results you can rely on
Certified 40 mL screw top vials with 24 mm cap closures. 0.2 and 2 mL screw top vial-cap kits; includes SureStop vials with AVCS caps. Includes innovative vial-cap technology to ensures proper screw cap seal every time. Highest levels of sample security and integrity. Use with mass spectrometry.
10321 west 70th st. eden prairie, mn 55344-3446 usa (952)935-4100 title: autosampler vial dimensions standard dimensions part number volume a inches (mm)
Mar 16, 2021 · 【2ml Amber Vial Material】: 9mm Screw Thread Autosampler Vials are made of USP Type 1, Class B Borosilicate Glass with very low expansion coefficient,conforming to USP Type I and ASTM E438, Type I, Class A requirements. It is ideal for containing all injectable preparations with acid, neutral and alkaline PH.
Jul 26, 2019 · VIALS DIMENSION: These autosample vials closure size 9mm, Diameter outer 11.6mm, Height 32mm, Vial Volume 2ml. Pack of 100 LOW EXPANSION COEFFICIENT: 9mm Screw Thread Autosampler Vials are made of clear Type 1, Class A Borosilicate Glass with very low expansion coefficient.
Wheaton Sample Vials, 2mL or 0.07oz, Clear, 8-425 Finish with 14B Rubber Liner, Type I Borosilicate Glass (2 mL E-C Vial, Glass Clear, 8-425 Rubber Lined Cap)2 mL E-C Vial, Glass Clear, 8-425 Cap, Rubber. Wheaton Glass E-C Sample Vial, with Phenolic Teflon-Faced Rubber Lined Cap Packaged Separately.
Provide an economical alternative to glass for some applications with Thermo Scientific™ 9mm Plastic Screw Thread Vials. They are manufactured from high-quality, GC-tested polypropylene material. Polypropylene vials are chemically inert and suitable for most chromatography applications.
2ml 9mm HPLC Vial，Clear Autosampler Vial, Borosilicate Sample Vial with Graduation, 9-425 Type Screw Threaded Vial, Blue Screw Cap with Hole, Red PTFE&White Silicone Septa, 100 of Pack by Aijiren 4.3 4.3 out of 5 stars (43)
MilliporeSigma. Vial inserts basically permit the use of smaller sample volumes with standard autosampler vials. Inserts are generally chosen based on the inner diameter of the vial neck. Standard opening vials (4.6 mm ID) require a 5 mm OD insert. Compare this item.